Creator Workshop
-
Not Printing
WHAT’S THE ISSUE? The nozzle is moving, but no filament is depositing on the print bed at the beginning of the printing, or no filament comes out in mid-print that result in printing failure. POSSIBLE CAUSES ∙ Nozzle Too Close to Print Bed ∙ Nozzle Not Prime ∙ Out of Filament ∙ Nozzle Jammed ∙...MORE -
Grinding Filament
What’s the Issue? Grinding or Stripped filament can happen at any point of the printing, and with any filament. It may cause printing stops, printing nothing in mid-print or other issues. Possible Causes ∙ Not Feeding ∙ Tangled Filament ∙ Nozzle Jammed ∙ High Retract Speed ∙ Printing Too Fast ∙ E...MORE -
Snapped Filament
What’s the Issue? Snapping can happen at the beginning of the printing or in the middle. It will cause printing stops, printing nothing in mid-print or other issues. Possible Causes ∙ Old or Cheap Filament ∙ Extruder Tension ∙ Nozzle Jammed Troubleshooting Tips Old or Cheap Filament Gener...MORE -
Nozzle Jammed
What’s the Issue? Filament has been fed to nozzle and the extruder is working, but no plastic comes out of the nozzle. Reracting and refeeding doesn’t work. Then it is likely that the nozzle is jammed. Possible Causes ∙ Nozzle Temperature ∙ Old Filament Left Inside ∙ Nozzle Not Clean Trou...MORE
