LIHLAHISO

PETG 3D Printer Filament

Tlhaloso e Khutšoanyane:

Likaroloana:

1. [Ho kopanya PLA le ABS] PETG filament e kopanya melemo ea bobeli PLA 3D printer filament le ABS 3D printer filament, bonolo ho sebelisa joaloka PLA, matla a tšoarellang joaloka ABS.
2. [Clog-Free & Bubble-Free] E Entsoe ebile e Entsoe ka Patent ea Mahala ea Clolog ho netefatsa boiphihlelo bo bonolo le bo tsitsitseng ba khatiso.Ho omisa ka ho feletseng bakeng sa lihora tse 24 pele ho phutheloa ka vacuum aluminium foil, e ka sireletsang filament ea PETG ka katleho ho tloha mongobo.
3. [Dimensional Accuracy & Consistency] Tsena tse thata PETG filaments ho ba tolerances ka tieo.Diameter 1.75mm, ho nepahala ha dimensional + / - 0.02 mm ntle le ho feteletsa letho;1 kg spool (2.2lbs).
4. [Tlhano e Pharalletseng] Ka lebaka la litekanyetso tsa boleng bo phahameng mabapi le ho nepahala ha tlhahiso le mamello e nyane ea bophara ba +/- 0.02mm, e ka sebetsa le ho lumellana ka ho phethahetseng le boholo ba likhatiso tse tloaelehileng tsa 1.75mm FDM 3D.
5. [Mahala Kotsi] Tiisetso ea mahala ea khoeli e le 'ngoe, matsatsi a 30 o khutlisetsoa Chelete haeba u sa khotsofala.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

LIEKETSENG TS'OANELO

1. tikoloho botsoalle le Non chefo;

2. Mmala o khanyang;

3. Ho fokotseha ho tlaase;

4. Good toughness, ha ho bonolo ho ba brittle, acid e ntle le ho hanyetsa alkali, ho tiea ho babatsehang, ho hanyetsa boemo ba leholimo, ho khomarela hantle;

5.Good dimensional botsitso, ha ho mapetsong le warping;

6.Ponaletso e phahameng, khanya e ntle

E loketse mefuta eohle ea likhatiso tsa FDM 3D.E loketse ho hatisa mefuta eohle ea mefuta e sebelisoang hangata, mesebetsi ea matsoho, likarolo tsa boenjiniere, mantsoe a papatso, joalo-joalo.

[Ponaletso e Phahameng]

Khatiso e na le sebopeho se setle se nang le khanya e ntle ea bokaholimo le phetiso e matla ea khanya.

[Ho bonolo ho Hatisa le Matla a Holimo]

PETG e na le toughness e phahameng le matla a tšusumetso e phahameng ha a bapisoa le PLA.E kopanya thepa e ntle ea mochini oa ABS le ts'ebetso e ntle ea khatiso ea PLA eo ho leng bonolo ho e hatisa ntle le ho loana.

[Ho Khanyetso ha Boemo ba Leratadima]

Ho hanyetsa boemo ba leholimo bo botle le ho hanyetsa lik'hemik'hale, tse hanyetsanang le mefuta e sa tšoaneng ea lik'hemik'hale le lisebelisoa tse tloaelehileng tsa ho hloekisa.

[Bohloeki bo Phahameng]

Lintho tse tala tsa bohloeki bo phahameng.ROHS e lumellana.Ha ho litšila kapa lisebelisoa tse nchafalitsoeng.Etsa hore extrusion e tsitsitseng le e boreleli ntle le likhoele tsa nozzle.

[Ha ho bonolo ho qhetsola]

Matla a matle, matla a ho tsitsa le ho ba le mokelikeli.Taolo ea boleng bo thata bakeng sa sehlopha ka seng.100% ha ho bubble.Phello e ntle ea khatiso ntle le ho loana.

[Bonepa bo Phahameng ba Bophara]

Mamello ea bophara ba filament e laoloa ka hare ho ± 0.02mm.E tsitsitseng esita le extrusion bakeng sa ho nepahala ho phahameng ho hatisa le boleng.

E fetileng: ABS 3D Printer Filament

E 'ngoe: TPU 3D Printer Filament

Diameter	1.75 ± 0.2mm
Mocheso oa Khatiso	220-250 ℃
Mocheso oa Bethe e Chesang	70-80 ℃
Botenya	1.05 ± 0.02 g/cm³
Mocheso oa ho Fetola Mocheso	60-70 ℃
Melt Flow Rate	6-11 g/min (220℃ 2.16kg)
Matla a tšepe	≥ 45 Mpa
Matla a Kobehang	≥ 60 Mpa
Elongation at Break	≥ 210%
NW	1.0 lik'hilograma
GW	1.3 lik'hilograma
Bolelele	≈ 330m