LIHLAHISO

TPU 3D Printer Filament

Tlhaloso e Khutšoanyane:

Likaroloana:

1. [Soft Filaments of High Elasticity] TPU Flexible Filament ke thermoplastic polyurethane (TPU) e thehiloeng filament e entsoeng ka ho khetheha ho sebetsa ho li-printer tse ngata tsa 3D tsa desktop.E na le boima ba lebopo la 95A mme e ka otlolla makhetlo a 3 ho feta bolelele ba eona ba pele.
2. [Free Build Surface] Ho khomarela bethe e ntle haholo, ho pota-pota ka tlaase le monko o fokolang, ho etsa hore li-filaments tsena tsa 3D tse tenyetsehang li le bonolo ho li hatisa.E ka ikopanya le bethe ea khatiso hantle ntle le ho futhumatsa.
3. [Clog-Free & Bubble-Free] TPU filament 1.75 Vacuumed Tialed e u fa boiphihlelo bo bonolo le bo tsitsitseng ba khatiso ka li-refill tsena.Ha ho Mahala ebile ha ho bubble e tla ts'episoa.
4. [Tsamaiso e Feletseng] E lumellana le likhatiso tsohle tsa FDM 'marakeng tse amohelang likhoele tsa 1.75 mm;Ho kenyeletsoa Prusa i3, Monoprice MakerSelect, SainSmart xCreality, le likhatiso tse ling tsa RepRap.
5. [Dimensional Accuracy & Consistency] e tsoetseng pele ea ho lekanya bophara ba CCD le ho ikamahanya le maemo a ho laola mokhoa oa ho ikamahanya le maemo mosebetsing oa ho etsa tiiso ea li-filaments tsena tse bonolo tsa TPU ho ba mamello e thata, bophara ba 1.75mm, ho nepahala ha dimensional + / - .02 mm ntle le ho feteletsa letho;1 kg spool (2.2lbs)

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

LIEKETSENG TS'OANELO

1. tikoloho botsoalle le Non chefo;

2. Mmala o khanyang;

3. Ho fokotseha ho tlaase;

4. Good toughness, ha ho bonolo ho ba brittle, acid e ntle le ho hanyetsa alkali, ho tiea ho babatsehang, ho hanyetsa boemo ba leholimo, ho khomarela hantle;

5.Good dimensional botsitso, ha ho mapetsong le warping;

6.Ponaletso e phahameng, khanya e ntle

E loketse mefuta eohle ea likhatiso tsa FDM 3D.E loketse ho hatisa mefuta eohle ea mefuta e sebelisoang hangata, mesebetsi ea matsoho, likarolo tsa boenjiniere, mantsoe a papatso, joalo-joalo.

[Ponaletso e Phahameng]

Khatiso e na le sebopeho se setle se nang le khanya e ntle ea bokaholimo le phetiso e matla ea khanya.

[Ho bonolo ho Hatisa le Matla a Holimo]

PETG e na le toughness e phahameng le matla a tšusumetso e phahameng ha a bapisoa le PLA.E kopanya thepa e ntle ea mochini oa ABS le ts'ebetso e ntle ea khatiso ea PLA eo ho leng bonolo ho e hatisa ntle le ho loana.

[Ho Khanyetso ha Boemo ba Leratadima]

Ho hanyetsa boemo ba leholimo bo botle le ho hanyetsa lik'hemik'hale, tse hanyetsanang le mefuta e sa tšoaneng ea lik'hemik'hale le lisebelisoa tse tloaelehileng tsa ho hloekisa.

[Bohloeki bo Phahameng]

Lintho tse tala tsa bohloeki bo phahameng.ROHS e lumellana.Ha ho litšila kapa lisebelisoa tse nchafalitsoeng.Etsa hore extrusion e tsitsitseng le e boreleli ntle le likhoele tsa nozzle.

[Ha ho bonolo ho qhetsola]

Matla a matle, matla a ho tsitsa le ho ba le mokelikeli.Taolo ea boleng bo thata bakeng sa sehlopha ka seng.100% ha ho bubble.Phello e ntle ea khatiso ntle le ho loana.

[Bonepa bo Phahameng ba Bophara]

Mamello ea bophara ba filament e laoloa ka hare ho ± 0.02mm.E tsitsitseng esita le extrusion bakeng sa ho nepahala ho phahameng ho hatisa le boleng.

E fetileng: PETG 3D Printer Filament

E 'ngoe: PCL 3D Printer Filament

Diameter	1.75 ± 0.02mm
Mocheso oa Khatiso	205-230 ℃
Mocheso oa Bethe e Chesang	50-80 ℃
Botenya	1.43 ± 0.05 g/cm³
Mocheso oa ho Fetola Mocheso	/
Melt Flow Rate	5-8 g/mots (190℃ 2.16kg)
Matla a tšepe	/
Matla a Kobehang	/
Elongation at Break	≥ 600%
NW	1.0 lik'hilograma
GW	1.3 lik'hilograma
Bolelele	≈ 290m