Izincedisi

  • Throat

    Umqala

    Yenziwe ngezinto eziqinileyo ze-aluminiyam, zihlala zisebenza

    Isebenza ngokugqibeleleyo nge-nozzle kunye nomqala womqala

    Umngxuma wangaphakathi wokuseta isikrufu: M6 (umbhobho wobushushu kunye ne-thermocouple)

    Umngxunya oFakela isifudumezi: 6mm ububanzi, iThermocouple Mounting Hole: 3mm ububanzi

    Iseti e-1 =1*Ibhloko yeAluminiyam yesifudumezi +1* Intsimbi engatyiwayo yeExtruder Nozzle Throat

  • Bearing Pulley

    Ukuthwala iPulley

    Nceda uqaphele: I-pulley ineentlobo ezininzi zobukhulu, nceda uqinisekise ngokuchanekileyo ngaphambi kokuba uthenge.Udinga uncedo olungakumbi nceda uzive ukhululekile ukuqhagamshelana nathi, siya kuzama konke okusemandleni ethu ukukunceda.

    Iipuli ziveliswa ngokuchaneka okuphezulu kwe-lathe machining, kunye nempazamo yomatshini ngaphakathi kwe-0.005mm.

    Izinto eziluncedo: Intshukumo egudileyo, ukuchaneka okuphezulu koshicilelo, ingxolo ephantsi, inokuphucula kakhulu isantya soshicilelo.

    Iphelele kwi-3D Printers: CR-10, CR-10S, Tevo Tarantula, CNC router hybrid, 8020 3030 njalo njalo Ubungakanani: I-Outer Diameter - 0.94in / 23.89mm;I-Bore Diameter - 0.19in / 5mm;Ubude - 0.4in/10.23mm

  • Nozzle Module

    Imodyuli yoMlomo

    UMGANGATHO OPHAKAMILEYO WE-HOTEND: Indibano yentsimbi ye-extruder ephezulu ene-hotend ephezulu kunye ne-hrease yobushushu obuphezulu.

    I-3D PRINTERS UKUHLANGANISWA: I-3D Printer Hotend Extruder Iyahambelana nazo zonke i-BestGee 1.75mm 3D Printers.

    UYILO OLUKHUSELEKILEYO: Ukuchasana nokuvuza kunye noYilo oluChasene nokuThintelwa luthintele uShicilelo lweMathiriyeli ukuba ingavuzi okanye ivalwe.

    I-TEFLON TUBE: 1.75mm PTFE Tube Transparent Clear High-Temperature Resistance Ukuya kuthi ga kwi-280 ° C. I-PTFE 3D Printer Tube yeyona iFlexible Fluoropolymer Tubing xa kuthelekiswa neFEP, PFA, ETFE, ECTFE.

    UKWANISA OKUQINISEKISIWEYO: Ngokusekwe kukuzithemba kumgangatho, iHotend yethu ye-3D Printer Metal Extruder ikhuselwe ngenkxaso engenaxhala.Ukwaneliseka komthengi yeyona nto iphambili kuthi.

  • Nozzle

    Umbhobho

    Ipakethe yexabiso eliKhulu: 0.4mm MK8 Imibhobho, isethi ye-10pcs kunye nomphandle wangaphandle uphawulwe ngobungakanani, ngoko unokuchonga ngokulula ukucaciswa komlomo.

    Ipharamitha: I-Input diameter 1.75mm, I-Diameter ye-Output 0.4 mm, i-thread yangaphandle ye-M6, ubude be-Tread 4mm.

    Ukusebenziseka kunye nokuhambelana: Imilomo yethu ifanelekile kwi-3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, iyahambelana nayo yonke i-1.75mm PLA ABS 3D umshicileli.Ilingana kanye njengeyokuqala.

    Itekhnoloji ye-Superb: Yenziwe nge-centing ye-CNC yokuchaneka kwe-lathe ye-othomathikhi kunye ne-tekhnoloji yokwenza ixesha elilodwa, Iqinisekisa ukugxila okuphezulu kwegalelo kunye nemingxuma yokuphuma, kungekhona nje ukunciphisa ukuchasana, ukuphepha ukuvala i-filament kwi-chamfer ejikelezileyo, kodwa ikwabonelela ngobomi obude benkonzo, yenza ngefilament ibe mpuluswa ngakumbi.

    Inkqubo yokusika echanekileyo: Icala ngalinye lombhobho lisikwa ngummese wedayimane, ngoko liya kubonisa indawo yokudibanisa ecacileyo kwaye inokuthintela ukuprintwa kokuvuza ngokufanelekileyo.