IMIKHIQIZO

I-PETG 3D Printer Filament

Incazelo emfushane:

Izici:

1. [Ihlanganisa i-PLA ne-ABS] I-PETG filament ihlanganisa izinzuzo zako kokubili i-PLA 3D printer filament kanye ne-ABS 3D printer filament, kulula ukuyisebenzisa njenge-PLA, amandla ahlala njalo njenge-ABS.
2. [I-clog-Free & Anayo Amabhamuza] Idizayinelwe futhi Yakhiwe Ngamalungelo Obunikazi E-Clog ukuze kuqinisekiswe ukuzizwisa kokuphrinta okushelelayo nokuzinzile.Ukumisa okuphelele amahora angama-24 ngaphambi kokufakwa kwe-vacuum aluminium foil, okungavikela ngempumelelo i-PETG filament kumswakama.
3. [Ukunemba Kobukhulu & Ukuvumelana] Le micu eqinile ye-PETG ukuze ibe ukubekezelelana okuqinile.Ububanzi 1.75mm, ukunemba kobukhulu +/ – 0.02 mm ngaphandle kwehaba;1 kg spool (2.2lbs).
4. [Ukuhambisana Okubanzi] Ngenxa yezindinganiso zekhwalithi ephezulu mayelana nokunemba kokukhiqiza kanye nokubekezelela okuncane ububanzi obungu-+/- 0.02mm, ingasebenza futhi ivumelane ngokuphelele nawo wonke amaphrinta amaningi avamile angu-1.75mm FDM 3D.
5. [Ayinabungozi] Iwaranti yamahhala yenyanga eyodwa, ukubuyiselwa imali kwezinsuku ezingama-30 uma unganelisekile.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

IMICIMBI

1. Ayinabungozi imvelo futhi Ayinabuthi;

2. Umbala ogqamile;

3. Ukuncipha okuphansi;

4. Ukuqina okuhle, akulula ukuba yi-brittle, ukumelana ne-asidi enhle ne-alkali, ukuqina okuhle kakhulu, ukumelana nesimo sezulu, ukunamathela okuhle;

5.Ukuzinza okuhle kwe-dimensional, akukho mifantu nokusonteka;

6.Ukucaca okuphezulu, isicwebezelisi esihle

Ifanele wonke amamodeli wamaphrinta we-FDM 3D.Ifanele ukuphrinta zonke izinhlobo zamamodeli avame ukusetshenziswa, imisebenzi yezandla, izingxenye zobunjiniyela, amagama okukhangisa, njll.

[Ukubonisa ngale okuphezulu]

Okuphrintiwe kunokuthungwa okuhle okucwebezela kahle kwendawo kanye nokudlulisa ukukhanya okuqinile.

[Kulula Ukuphrinta futhi Amandla Aphakeme]

I-PETG inokuqina okuphezulu namandla omthelela aphezulu uma iqhathaniswa ne-PLA.Ihlanganisa izici ezinhle zemishini ye-ABS nokusebenza okuhle kokuphrinta kwe-PLA okulula ukuyiphrinta ngaphandle kokungqubuzana.

[Ukumelana Nesimo Sezulu Okuhle]

Ukumelana nesimo sezulu esihle kakhulu nokumelana namakhemikhali, ukumelana nezinhlobonhlobo zamakhemikhali nama-ejenti okuhlanza ajwayelekile.

[Ukuhlanzeka okuphezulu]

Impahla eluhlaza yokuhlanzeka okuphezulu.I-ROHS iyahambisana.Akukho ukungcola noma izinto ezigaywe kabusha.Nika amandla i-extrusion ezinzile futhi ebushelelezi ngaphandle kwe-nozzle jam.

[Akulula ukuphula]

Ukuqina okuhle, amandla okuqina kanye ne-liquidity.Ukulawulwa kwekhwalithi okuqinile kweqeqebana ngalinye.100% alikho ibhamuza.Umphumela omuhle wokuphrinta ngaphandle kokungqubuzana.

[Ukunemba okuphezulu kobubanzi]

Ukubekezelela ububanzi be-filament kulawulwa ngaphakathi kuka-± 0.02mm.Izinzile futhi i-extrusion yokunemba okuphezulu kokuphrinta nekhwalithi.

Okwedlule: I-ABS 3D Printer Filament

Olandelayo: I-TPU 3D Printer Filament

Ububanzi	1.75 ± 0.2mm
Izinga Lokushisa Lokuphrinta	220-250 ℃
Izinga Lokushisa Lombhede	70-80℃
Ukuminyana	1.05 ± 0.02 g/cm³
I-Heat Deflection Temperature	60-70 ℃
Melt Flow Rate	6-11 g/min (220℃ 2.16kg)
Amandla Okuqina	≥ 45 Mpa
Ukugoba Amandla	≥ 60 Mpa
Elongation at Break	≥ 210%
NW	1.0 kg
GW	1.3 kg
Ubude	≈ 330m