IMIKHIQIZO

PLA Silk 3D Printer Filament Featured Image

I-PLA Silk 3D Printer Filament

Incazelo emfushane:

Izici:

1. [Ukuzizwa Okufana Nosilika] Indawo ecwebezelayo enosilika ecwebezelayo, enikeza ukuthinta okubushelelezi, okunepharele nokuhlukile.Into Ephrintiwe Ye-3D Eqediwe Enokubukeka Okubushelelezi Kwe-Silk Glossy, ilungele ubuciko, ubuciko, i-DIY, namaphrojekthi amaningi wokuphrinta we-3D ahlukene.
2. [Phrinta Kalula] Amandla amahle okubopha ungqimba enza izingxenye zokuphrinta zibe namandla.Ukuma okuhle, akukho bhamuza, akukho ukungqubuzana konqenqemeni, ukondla okungaguquki, ukuphrinta okuzinzile, akukho ukuvala, okuvumelana nemvelo, kulungele ukuphrinta kwangaphakathi.
3. [Ukuvumelana Okuphezulu] 1.75mm Usilika we-PLA umcu obekezelela ubukhulu obukhulu, idizayini elingana Amaphrinta amaningi e-FDM 3D Emakethe, BestGee, Ultimaker, RepRap derivatives, MakerBot, Makergear, Prusa i3, Monoprice MakerSelect nokunye.
4. [Amathiphu Wokuphrinta]: Ncoma umbhede wokushisa ongu-50-60°C. Ncoma izinga lokushisa lokuphrinta: 200°C. Ukuze ugweme ukuphithana, faka umcu emigodini ye-spool ukuze uyilungise ngemva kokusetshenziswa njalo.
5. [Iphakheji Newaranti]: Qedela ukomisa amahora angu-24 ngaphambi kokufakwa kwe-vacuum aluminium foil.Iwaranti yamahhala yenyanga eyodwa, ukubuyiselwa imali kwezinsuku ezingama-30 uma unganelisekile.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

IMICIMBI

[Ukwakheka kukasilika]

Uma kuqhathaniswa ne-PLA evamile, Usilika we-PLA unokucwebezela okugqamile futhi usilika njengokuthungwa okubushelelezi.

[Inobungani Nemvelo]

Ibanga lokudla impahla enobungani kwemvelo.Ikhishwe kummbila noma ezinye izitshalo.Iphephile, ayinaphunga futhi iyabola.Ayikho ingozi empilweni.

[Ukuhambisana okuphezulu]

Isetshenziswa kabanzi ekuphrinteni kwe-3D.Ifanele amaphrinta angu-99.99% e-FMD/FFF 3D.Kulula ukwakha kanye nomphumela omuhle wokuphrinta.

[Akulula ukuphula]

Ukuqina okuhle, amandla okuqina kanye ne-liquidity.Ukulawulwa kwekhwalithi okuqinile kweqeqebana ngalinye.100% alikho ibhamuza.Umphumela omuhle wokuphrinta ngaphandle kokungqubuzana.

[Ukunemba okuphezulu kobubanzi]

Ukubekezelela ububanzi be-filament kulawulwa ngaphakathi kuka-± 0.02mm.Izinzile futhi i-extrusion yokunemba okuphezulu kokuphrinta nekhwalithi.

Okwedlule: I-PCL 3D Printer Filament

Olandelayo: I-PLA Metal Color 3D Printer Filament

Ububanzi	1.75 ± 0.2mm
Izinga Lokushisa Lokuphrinta	175-200 ℃
Izinga Lokushisa Lombhede	50-80℃
Ukuminyana	1.25 ± 0.05 g/cm³
I-Heat Deflection Temperature	50-60 ℃
Melt Flow Rate	5-7 g/min (190℃ 2.16kg)
Amandla Okuqina	≥ 60 Mpa
Ukugoba Amandla	≥ 70 Mpa
Elongation at Break	≥3.0%
NW	1.0 kg
GW	1.3 kg
Ubude	≈ 330m